Basement Plumbing
in Tbilisi

Repair, replacement and installation of pipes, drainage, risers and utility plumbing in basement spaces.

  • We work with water supply, drainage and risers
  • We fix leaks, smells, clogs and emergency sections
  • We replace old pipes and failing joints
  • We come out to inspect and tailor a solution to the property

On-site inspection, repair and installation of plumbing utilities in basement spaces.

Basement plumbing work in Tbilisi

Need work done in a basement?

Describe the task — we'll suggest a solution

We'll call you back within 5 min.

+995 322 151 532 Get an estimate

We work in tough conditions

Basements, utility rooms, limited access, old utilities.

Inspection before the estimate

We assess the state of the pipes, slopes, access and scope of work.

Repair and full installation

From a local leak to a complete replacement of the utilities.

Problems with pipes or drainage in the basement?

We repair, replace and install plumbing utilities in basement spaces: water supply, drainage, risers, shut-off valves and utility units. Before the estimate we inspect the property, check the state of the pipes, the slopes, the access and the cause of the problem.

We work with basements in residential buildings, private houses, commercial premises and utility areas. We fix leaks, smells, clogs and emergency sections, and where needed we replace old utilities with a reliable solution tailored to your property.

Scope of work

What basement plumbing
covers

We repair, replace and install utilities in basement spaces

  1. Pipe repair and replacement

    Water supply and old sections

    • Replacing old water-supply sections
    • Fixing leaks
    • Relocating and installing pipes
    • Working in hard-to-reach spots

    For basements with leaking or worn pipes — we replace a section or the whole line.

  2. Drainage and waste

    Drain lines and slopes

    • Repairing drainage pipes
    • Fixing smells and leaks
    • Checking slopes
    • Replacing problem sections

    A smell, slow drainage or seepage in the basement is often a matter of slopes and pipe condition.

  3. Utility units

    Equipment and valves

    • Connecting pumps
    • Manifolds and shut-off valves
    • Water inlet units
    • Preparing utilities for further work

    We prepare the system so further work — repairs, remodeling or connections — goes without rework.

The exact scope of work is confirmed after inspecting the basement

Common problems

What problems
clients come
to us with

Most often, basement enquiries are about leaks, sewer smells, old pipes and utility problems.

We help identify the cause of the problem and tailor a solution to your property.

Need your basement utilities inspected?

After the inspection we'll tell you which repair option suits your property best.

Book a basement inspection
When it fits

What properties basement
plumbing is for

We work with basement spaces in residential buildings, private houses, commercial properties and premises after reconstruction

Residential buildings

Apartment-block basements, shared utilities, risers and utility rooms.

Suitable for repairs, replacing pipe sections and servicing shared utilities.

Private houses

Basement floors, boiler rooms, bathrooms, pump areas and the water inlet.

We help get the utilities in order and prepare the system for stable operation.

Commercial properties

Cafes, shops, warehouses, salons, offices and other properties with engineering utilities.

We account for the load, access to the pipes and the property's ongoing operation requirements.

After renovation or reconstruction

When pipes need relocating, old layout replacing, or plumbing preparing for a new use of the space.

Suitable for properties where the basement is being repurposed for a new task or format.

We'll tailor a solution to the property type, the state of the utilities and the scope of work

We'll tailor a solution

We'll tailor a solution
to your property

Choose the work format — from a local repair to installing utilities for a new project

Local repair

For a leak, a smell, a small pipe section or a single joint.

Suitable if:

  • the problem shows in one spot
  • there's no need to replace the whole system
  • you need a quick call-out
Call a technician
Best value

Complete section replacement

For old pipes, recurring leaks, problem drainage or several points.

Suitable if:

  • the pipes are old or worn
  • the problem keeps recurring
  • you need a reliable result
Get an estimate

Installation for a new project

For a basement being prepared for commercial use, a bathroom, a warehouse, a utility room or reconstruction.

Suitable if:

  • pipes need running from scratch
  • equipment needs connecting
  • a correct utility layout matters
Discuss the project
How the work goes

How basement work
is carried out

First we inspect the utilities and the cause of the problem, then we propose a clear solution and do the work

  1. Inspecting the space and utilities

    Property assessment

    We check pipes, joints, access, damp, slopes and the state of the drainage.

    First we assess the real state of the basement and its utilities.

  2. Identifying the cause of the problem

    System diagnostics

    We find the source of the leak, smell, clog or weak section of the system.

    It's important to fix not just the symptom but the cause of the problem.

  3. Proposing a solution and an estimate

    Work plan

    We explain what can be done locally and where a section is better replaced fully.

    You know the scope of work, the materials and the cost in advance.

  4. Carrying out the repair or installation

    On-site work

    We do the work carefully, accounting for the features of the basement space.

    After the work we check the joints and that the system runs.

How the cost of basement
work is calculated

The cost depends on the state of the pipes, access to the utilities, the scope of demolition, the complexity of the installation, the pipe material, whether pumps need connecting and how urgent the work is.

The price is affected by:

  • scope of work: a local repair or a full replacement
  • access to the pipes and risers
  • the state of the old utilities
  • the type of pipes and joints
  • drainage, water supply or equipment
  • whether an on-site inspection is needed

We'll estimate the cost from photos, video or after inspecting the property

Get an estimate from photos
Plumbers working on engineering utilities at a technical site
Pipe installation and repair by service specialists

How the service works

How our
specialists work

With basement work, the point isn't just to swap a pipe — it's to understand the cause of the problem and deliver a solution you won't have to redo in a month.

We inspect the utilities, assess the access, the state of the pipes and the slopes, and choose a clear repair or replacement option for the specific property.

  • We inspect the property before starting work
  • We check access, slopes and the state of the pipes
  • We propose a clear repair or replacement option
  • We handle local and complex tasks

An engineering approach to every property

Discuss the property
Worth knowing

Why you shouldn't put off
basement plumbing repairs

Even a small leak, a smell or an old pipe section can lead to a more complex repair if the cause isn't dealt with in time.

Basement plumbing done
without unnecessary rework

We check the utilities, account for the features of the space and tailor a solution to the real state of the property

On-site utility inspection

We check the real state of the pipes and the access to them.

A clear solution before work starts

We explain what needs replacing and what can be repaired.

Work with water supply and drainage

We repair, install and replace utilities.

Accounting for the basement's features

Damp, access, old walls, limited space.

Tidy pipe installation

We aim to make the system easy to service.

Help with materials

We'll advise which pipes, fittings and parts will suit.

Answers to frequently
asked questions

Telegram WhatsApp
Telegram WhatsApp